7mm

These are "display wheels" as supplied with some of our 7mm kits. The wheels are a press fit on a steel axle. The wheels are intended for use with a static model.  There are four wheels and two axles in a packet. The wheels are based on Mansell pattern wheels which can be difficult to source.  This pattern wheel was commonly used on passenger stock.   ..

    These are "display wheels" as supplied with some of our 7mm kits. The wheels are a press fit on a steel axle. The wheels are intended for use with a static model.  There are four wheels and two axles in a packet. The wheels are based on 8 spoked wheels which were often used on goods vehicles and early coaches.   ..

About this Vehicle: The GNR had several types of brake van. The brake van type that this model is the 8 wheeled version with vertical planking. This vehicle was initially used for mineral traffic. Sixty vehicles were introduced in 1913-1914. These vehicles were long lived there were still 46 in service in 1948 from a declared 60 in service in 1922 (from the inventory at grouping), until the early 1960's. One of these vehicles has been preserved.   This Kit features: Pre-cut MDF..

About this Vehicle: This model represents the standard, outside framed, covered van used by the GNR. In 1906,the GNR recorded 1563 covered vans. At grouping, 669 covered vans are recorded as surviving into LNER stock. These covered vans were actively constructed from about 1867 (Stirling) until about 1905 (Gresley) when outside framed vehicles were gradually replaced by inside framed stock. Photographic records of wagon stock (RAIL 326/682 and RAIL 326/1072 at the National Archives, UK) depict a number o..

This 7mm scale ("O" gauge) kit  is primarily made from laser cut and etched MDF with 3D printed roof and underframe components. This kit can be completed to represent any one of several versions of a standard type used by the Great Northern Railway. About this Vehicle: The GNR had several types of brake van. The brake van type that this model is the 4 wheeled version with horizontal planking. It was made in 10 ton, 15 ton and 20 ton versions. The physical dimensions overall were the sam..

This 7mm scale ("O" gauge) kit  is primarily made from laser cut and etched MDF with 3D printed roof and underframe components. This Kit features: Pre-cut MDF sides and ends. Sturdy construction 3D Printed roof 3D printed underframe incorporating axleguards. Brake components About this Vehicle: The GNR had several types of brake van. The brake van type that this model represents is the twenty ton, 6 wheeled version with horizontal planking. This vehicle was mainly use..

This 7mm scale ("O" gauge) kit  is primarily made from laser cut and etched MDF with 3D printed roof and underframe components. This kit can be completed to represent any one of several versions of a standard type used by the Great Northern Railway. About this Vehicle: The GNR had several types of brake van. The brake van type that this model is based on, with vertical planking, was a 20 ton version that replaced earlier vans from the early 1900's onwards. It was given diagram 1602/..

About this Vehicle: This 7mm ("O" Gauge) kit represents a Great Western Railway four wheeled milk van (O1) This was a four wheeled vehicle and should not be confused with the six wheeled siphon which is also available as a kit from Diagram3D. The original vehicle was produced in several lots between 1871 and the late 1880's. There were two distinct variations with differing door profiles. Sufficient parts are provided to complete either one of the versions of the vehicles. The kit is..

About this Vehicle: This 7mm ("O" Gauge) kit represents a Great Western Railway six wheeled milk van (O2) This was a six wheeled vehicle. It was developed for the transportation of milk in churns. It was also used for transporting fish. Thys kit is made from MDF with detail components etched into card overlays and 3D printed components including a roof, axleboxes and brake components. These vehicles were modified over their lifetimes in keeping with applicable regulations. In general ..

About this Vehicle: This 7mm ("O" Gauge) kit represents a Great Western Railway six wheeled milk van (O3) This was a six wheeled vehicle. It was developed for the transportation of milk in churns. It was also used for transporting fish. Thys kit is made from MDF with detail components etched into card overlays and 3D printed components including a roof, axleboxes and brake components. These vehicles were modified over their lifetimes in keeping with applicable regulations. In general ..

About this Vehicle: This 7mm ("O" Gauge) kit represents a Great Western Railway six wheeled milk van (O4) This was a six wheeled vehicle. It was developed for the transportation of milk in churns. It was also used for transporting fish. It was a  popular design. Thys kit is made from MDF with detail components etched into card overlays and 3D printed components including a roof, axleboxes and brake components. These vehicles were modified over their lifetimes in keeping with appl..

About this Vehicle: This kit represents a historical London and North Western Railway Railway (LNWR) 21ft Full Brake of the mid 1800's, designed and produced in-house by Diagram3D. This kit is created with 3D printer and laser technology. It is pre-coloured. The kit is designed to be easy to complete. The kit is based on historical drawings. This Kit features: 3D printed sides, ends and underframes. 3D printed roof and oil lamps 3D printed solebars Sturdy construction Adhesi..

About this Vehicle: This model of an LNWR 3 compartment 1st class vehicle is typical of the short vehicles of the early period. The model relies on drawings and similar vehicles of the period. This kit is created with 3D printer and laser technology.The kit is designed to be easy to complete. This Kit features: 3D printed sides, ends and underframes. 3D printed roof and oil lamps 3D printed solebars Sturdy construction Adhesive, couplings, etc. are not included. A difficult and ..

About this Vehicle: This kit represents a historical London and North Western Railway Railway (LNWR) four compartment second class carriage of the mid 1800's, designed and produced in-house by Diagram3D. This kit is created with 3D printer and laser technology. It is pre-coloured. The kit is designed to be easy to complete. The kit is based on historical drawings. This Kit features: 3D printed sides, ends and underframes. 3D printed roof and oil lamps 3D printed solebars Sturdy c..

About this Vehicle: This kit represents a historical London and North Western Railway Railway (LNWR) carriage of the mid 1800's, designed and produced in-house by Diagram3D. This kit is created with 3D printer and laser technology. It is pre-coloured. The kit is designed to be easy to complete. The kit is based on information gathered about a grounded coach body by the LNWR society. This Kit features: 3D printed sides, ends and underframes. 3D printed roof and oil lamps 3D printed ..