This website uses cookies. By continuing you permit us to deploy cookies, as detailed in our Privacy Policy.  Accept
 

Search:

Products meeting the search criteria

Sort By:
GNR 20 ton 8 wheeled  brake van
About this Vehicle: The GNR had several types of brake van. The brake van type that this model is the 8 wheeled version with vertical planking. This vehicle was initially used for mineral traffic. Sixty vehicles were introduced in 1913-1914. These vehicles were long lived there were still 46 in service in 1948 from a declared 60 in service in 1922 (from the inventory at grouping), until the early 1960's. One of these vehicles has been preserved.   This Kit features: Pre-cut MDF..
£30.00
GNR 20 ton brake van
About this Vehicle: The GNR had several types of brake van. The brake van type that this model is the 8 wheeled version with vertical planking. This vehicle was initially used for mineral traffic. Sixty vehicles were introduced in 1913-1914. These vehicles were long lived there were still 46 in service in 1948 from a declared 60 in service in 1922 (from the inventory at grouping), until the early 1960's. One of these vehicles has been preserved.   This Kit features: Pre-cut woo..
£22.00
GNR 20 ton brake van (6 Wheels)
About this Vehicle: The GNR had several types of brake van. The brake van type that this model represents is the twenty ton, 6 wheeled version with horizontal planking. This vehicle was mainly used for heavy goods and mineral traffic. These brake vans have been described in books (e.g. 19th Century Railway Drawings by A. Prior, and LNER Wagons by P. Tatlow)  and the Model Railway press (Especially an article in  "Model Railway News" December 1967). A representative model will enhan..
£18.00
GNR Express Goods Van
There were over 280 vans of this type in service with the GNR until grouping in 1922. These vans were fully fited with vaccum brakes. They were used for express goods traffic. This model construction is similar to GN04-W004 GNR covered Van. This Kit features: Pre-cut wood sides and ends. Sturdy construction 3D printed axleguards and brake components 3D printed roof and buffers Build impressive rolling stock using this kit as the basis of your next project. ..
£16.00
GNR Outside Framed Van
About this Vehicle: This model represents the standard, outside framed, covered van used by the GNR. In 1906,the GNR recorded 1563 covered vans. At grouping, 669 covered vans are recorded as surviving into LNER stock. These covered vans were actively constructed from about 1867 (Stirling) until about 1905 (Gresley) when outside framed vehicles were gradually replaced by inside framed stock. Photographic records of wagon stock (RAIL 326/682 and RAIL 326/1072 at the National Archives, UK) depict a number o..
£16.00
GNR Perishable Goods Van
The Great Northern Railway (GNR) built a small number of butter lard and milk vans. Similar vehicles were used for the conveyance of Fruit, meat and fish products. There were detail differences between the vehicles however they were all based on the standard 16ft body and incorporated a clerestory roof which makes them attractive and unusual vehicles. A few vehicles survived into LNER ownership in 1922. This Kit features: Pre-cut wood sides and ends. Sturdy construction 3D printed axleguards..
£16.00
GWR Siphon O1 (four wheeled) kit 7mm
About this Vehicle: This 7mm ("O" Gauge) kit represents a Great Western Railway four wheeled milk van (O1) This was a four wheeled vehicle and should not be confused with the six wheeled siphon which is also available as a kit from Diagram3D. The original vehicle was produced in several lots between 1871 and the late 1880's. There were two distinct variations with differing door profiles. Sufficient parts are provided to complete either one of the versions of the vehicles. The kit is..
£38.00
GWR Siphon O1 (four wheeled) kit OO
*** Updated Model **** About this Vehicle: This kit is based on the original  GWR siphon version O1. This was a four wheeled vehicle and should not be confused with the later six wheeled siphon which took the same designation after this van became extinct. The original vehicle was produced in several lots between 1871 and the late 1880's. There were two distinct variations with differing door profiles.  Sufficient parts are provided to complete either one of the versions of the ..
£23.00
GWR Siphon O2 milk van kit 7mm
About this Vehicle: This 7mm ("O" Gauge) kit represents a Great Western Railway six wheeled milk van (O2) This was a six wheeled vehicle. It was developed for the transportation of milk in churns. It was also used for transporting fish. Thys kit is made from MDF with detail components etched into card overlays and 3D printed components including a roof, axleboxes and brake components. These vehicles were modified over their lifetimes in keeping with applicable regulations. In general ..
£48.00
GWR Siphon O3 milk van kit 7mm
About this Vehicle: This 7mm ("O" Gauge) kit represents a Great Western Railway six wheeled milk van (O3) This was a six wheeled vehicle. It was developed for the transportation of milk in churns. It was also used for transporting fish. Thys kit is made from MDF with detail components etched into card overlays and 3D printed components including a roof, axleboxes and brake components. These vehicles were modified over their lifetimes in keeping with applicable regulations. In general ..
£48.00
Wagon Axleguards (pack of 4)
This is a pack of four kits.  Each kit will make a set of two axleguards which is sufficient for one four wheeled wagon. Each kit consists of 3d printed parts (random colour) as illustrated. The plastic parts are made from PLA which is environmentally friendly. The parts are readily assembled. Wheels are not included. The axleguards can also be used for other projects. ..
£12.00
GNR 1882 Open Goods Wagon, 9 ton
"550 NINE-TON GOODS WAGONS -- GREAT NORTHERN RAILWAY. The Great Northern Railway Company invites tenders for 550 goods wagons. The accompanying engraving illustrates their construction. The following is a copy of the specification. The general arrangement of the wagon is shown in the engravings above. The body to be 15ft. long by 7ft 6in. wide outside, and 3ft. deep inside exclusive of  ½ in. coping iron; to be carried on four wheels, 3ft. 2 ½ in. diameter at centre of tread, plac..
GNR Outside Framed Van
A step by step walk through of the assembly of this 4mm scale model of a GNR outside framed covered goods van with examples of the many uses of this vehicle. ..
NLR Ballast Wagon No. 216
This is a lasercut kit of a historical railway vehicle, designed and produced in-house by Design3D. This Gauge 3 kit is manufactured from Birch Plywood, MDF, plastic and card. Adhesive, paint, wheels, couplings, buffers etc. are not included. To complete this kit the the purchaser has to supply suitable wheels, couplings and other fittings. ..
£60.00